(Shown in Translucent Red, with brp front end weights)

Ferrari Dino Deluxe, (includes drilled posts, screws, & installed glass), LWB, $25

Color

Red Translucent Red Metalflake Red Pearl Red Yellow Translucent Yellow Flourescent Yellow Metalflake Yellow Blue Light Blue Translucent Blue Pearl Blue Metalflake Blue Black Metalflake Black Green Parrot Green Translucent Green Metalflake Green Pearl Green Orange Translucent Orange Metalflake Orange Flourescent Orange Purple Translucent Purple Metalflake Purple Pearl Purple Charcoal Gray Silver Pearl White Metalflake White Gold Pearl

(Shown in Yellow resin)

Ferrari Dino, LWB, $12

Color

Red Translucent Red Metalflake Red Pearl Red Yellow Translucent Yellow Flourescent Yellow Metalflake Yellow Blue Light Blue Translucent Blue Pearl Blue Metalflake Blue Black Metalflake Black Green Parrot Green Translucent Green Metalflake Green Pearl Green Orange Translucent Orange Metalflake Orange Flourescent Orange Purple Translucent Purple Metalflake Purple Pearl Purple Charcoal Gray Silver Pearl White Metalflake White Gold Pearl

Ferrari Dino (Ready To Run: Installed glass, drilled posts, brp screws), LWB, $15

Color

Red Translucent Red Metalflake Red Pearl Red Yellow Translucent Yellow Flourescent Yellow Metalflake Yellow Blue Light Blue Translucent Blue Pearl Blue Metalflake Blue Black Metalflake Black Green Parrot Green Translucent Green Metalflake Green Pearl Green Orange Translucent Orange Metalflake Orange Flourescent Orange Purple Translucent Purple Metalflake Purple Pearl Purple Charcoal Gray Silver Pearl White Metalflake White Gold Pearl

---

brp Front End weight set (VHORS approved) - $7.50

Tim Keevin did a test of all the currently available fronts ends on the MASCAR bbs, check it out:
Tim's front end test

I just did a "how to" to install these. Click Here.

I recommend the RT Delrin fronts for this application. The shank on these wheels need to be cut off to accomdate the brp wheel weights. Using the RT Delrin fronts with the brp wheel weights gives a front end with a total weight of 2.6 grams. The weight is carried beneath and to the rear of the axle, which results in a lower center of gravity, than competing front ends, which enhances the handling. . ..TOM

RT-240D WHITE DELRIN 0.310" T-Jet Front end set 1.0 GRAMS $7.50

Just the thing to lower your C.G. on those ultra smooth routed tracks!

.063 Carbon Fiber front axle $2.00

Legend:

DP is for dual posts, SWB is Short wheelbase, LWB is Long wheelbase, MWB is the center wheelbase position. Bodies are shown mounted on a Fray chassis, unless otherwise specified, .305 fronts and .350 rears.

---

---

BRP's Gallery of Customer Bat-Jets

We have two levels of finish, the basic body is trimmed, untrimmed glass, and without drilled posts. Deluxe bodies include drilled posts, installed glass, screws, metalflake or pearl resin, stripes and or decals per request. email tom@bat-jet.com with your preferences.

BASIC BODY OPTIONS:

Basic body glass installation is available for an additional $1, per body.

Brp screw set - 1-72 stainless steel or brass front, and a 1-72 nylon rear. The two screws, also allows full float on the body for better handling. This set does require countersinking your guidepin. Price is $2 a set.

Ordering information